Re: HP 1920-24G schedule reboot datetime format
Could it be that the NTP synchronization, once happened (in a time range of few hours it probably happens more frequently than in a time range of only 10/20 minutes), is able to disrupt the (scheduled...
View ArticleRe: HP 1920-24G schedule reboot datetime format
It's a good question...I've disabled the NTP and scheduled a reboot at 23:00. I tell you tomorrow what happens.
View ArticleRe: Broken firmware update website link for J9833A and J9834A PS-1810 switches
Dennis Handly wrote:I didn't see any certificate problems. And both download links show:https://h10145.www1.hpe.com/hpweb_error.html?aspxerrorpath=/Downloads/ProductsList.aspxThe page you requested...
View ArticleRe: Broken firmware update website link for J9833A and J9834A PS-1810 switches
>An error occurred during a connection to h10145.www1.hpe.com. Peer's Certificate has been revoked. Looks like the certificate was updated yesterday.
View ArticleRe: HP 1920-24G schedule reboot datetime format
It works !The trouble is due to NTP ...Where can I contact HP Team to feedback (bug report) about it ?
View ArticleClik here to view.
Re: STP managed and unmanged Switches
TerjeAFK wrote:Unmanaged switches do not participate in STP, ie. they do not send out BPDU. So if you are worried about loops involving those switches you should look at solutions like loop-protect...
View ArticleRe: HP 1920-24G schedule reboot datetime format
My Network -> My Support -> Select a (registered?) Product -> Web Case Support (support by E-mail) -> Case Submission.
View ArticleRe: HP 1920-24G schedule reboot datetime format
I'm curious how support will handle this. You're using CLI, which officially isn't supported.
View ArticleRe: HP 1920-24G schedule reboot datetime format
My Network -> My Support -> Select a (registered?) Product -> Web Case Support (support by E-mail) -> Case Submission.Thank you. I'm curious how support will handle this. You're using...
View ArticleRe: HP 1920-24G schedule reboot datetime format
The day (maybe never if nobody issue a Feature Request) the HPE OfficeConnect 1920 Switch Series will let to schedule a reboot through its Web GUI with NTP enabled...well...that day this issue will...
View ArticleClik here to view.
Re: switch HP
Hello Yes you can.for example:interface gi1/0/1port link-type trunkport trunk pvid vlan 5 If you are using de web GUI u can find it here: Kind regards
View ArticleRe: Questions about different untagged VLANs on HP 1920
HiYesYou can change the pvid of the ports under network -> vlan -> modify port in the web GUIKind regards
View ArticleQuickBooks Contact Number
QuickBooks is an account management software used in small and large business to manage their employee’s payroll, pay slip, etc. If you are facing any kind of problem to access QuickBooks accounting...
View ArticleRe: switch HP
Open VLAN interface, and assign an extra IP address to VLAN5.This switch has limited L3 functionality, each L3 interface can be used for management.
View ArticleRe: HP 1920-24G schedule reboot datetime format
Is the system time properly/correctly set on the Switch?<HP1920-8G_A>schedule reboot at ?STRING Exact time(hh:mm)<HP1920-8G_A>display time-range allCurrent time is 12:03:28 6/23/2016...
View ArticleHP 1920 temporary no reply to ICMP request
I am observing a temporary not reply to icmp request on different switches 1920. Traffic pass through correctly but, for little time, switch not reply to ping request. In fact, IP is associated to Vlan...
View ArticleRe: HP 1920 temporary no reply to ICMP request
We don't have any 1920 switches here, but I have seen this on low-end HP switches before (1800 series for example) where the switch has been under high load and has dropped ICMP packets for a short...
View Articlewhy mount switch up on wall?
i have a procurve 1810g-24 and want to mount it vertically in the wood rafters.m documentation says the switch should be mounted with the ports facing upward. why is this? if i do that inatead of...
View ArticleRe: HP 1920 temporary no reply to ICMP request
Thank you for suggestion. CPU is stable around 4% and memory is for 42% used. Issue seems not correlated to memory or cpu high load.
View ArticleRe: why mount switch up on wall?
Probably you've read the wrong documentation.The HP ProCurve 1810G-24 Switch (J9450A) Installation and Getting Started Guide (see here) reports, among others, these very first explicit warnings:The...
View Article