Re: HPE 1920 48G poe+ WebGUI timeout, and no internet access
tracert works from subnet A to the laptop on subnet B.Ping works fine between all hosts now. The firewall configuration is fine. I could drop in the old HP procurve 2626 switch and it would work...
View ArticleRe: HPE 1920 48G poe+ WebGUI timeout, and no internet access
If you're referring to this configuration line:# ip route-static 0.0.0.0 0.0.0.0 192.168.1.1 #that's exactly what I found on mine (clearly I use different IP Address) and all looks quite good.A doubt:...
View ArticleRe: HPE 1920 48G poe+ WebGUI timeout, and no internet access
config of old switch: ; J4900A Configuration Editor; Created on release #H.10.38hostname "sw1br"snmp-server contact "%%%%%%%"snmp-server location "Brooks"time timezone -420time daylight-time-rule...
View ArticleRe: HPE 1920 48G poe+ WebGUI timeout, and no internet access
There is something strange on 2626 configuration: authorized managers belong to 192.168.0.0/16 subnet (exactly 192.168.0.13) where VLAN Id 1 IP assigned address (so the Switch management address) - it...
View ArticleRe: CCC - China Compulsory Certificate
probably, that switch was made in China to begin with
View ArticleRe: Procurve 1920 Switch
Parnassus wrote:"Apart from that, the HPE OfficeConnect 1920 Switch Series should support up to 4094 (Layer 2) simultaneous IEEE 802.1Q VLAN IDs and globally only 8 (Layer 3) IP VLANs for basic routing...
View ArticleRe: VLAN Issues on ProCurve 1920
Why do you setup procurve port 7 as trunk?afaik, on procurve trunk means link aggregation, whereas on comware it means a port has multiple VLANs on it
View ArticleRe: HPE 1920 48G poe+ WebGUI timeout, and no internet access
Why is port Gi1/0/1 of the 1920 set to hybrid mode ? Never ever use that ! Only use access or trunk
View ArticleRe: HPE 1920 48G poe+ WebGUI timeout, and no internet access
The unanswered question about 1/0/1 of 1920: what is connected to?Hybrid (or not) could depend to what is connected to...since the whole picture (Firewall side and detailed network topology on site A...
View ArticleRe: VLAN Issues on ProCurve 1920
I had port 7 set up as a normal port before, and it still did not work right after I physically relocated the switch. I thought I would try that just in case it made a difference. Should I change port...
View ArticleRe: Procurve 1920 Switch
Thanks for correcting me! never stop learning true numbers with respect to what's advertised.
View ArticleRe: How is VCT supposed to work in a V1910?
Isn't the HP 1910 Gigabit Ethernet Switch Series User Guide (here) clear about VCT? see VCT Virtual Cable Test function of 1910 [*] explained at sheet 112 of 579 (Page 99).[*] Better if it runs on...
View ArticleRe: How is VCT supposed to work in a V1910?
What is missing is what the returned result would mean with different equipment types at the other end.1000baseT at the other end returns meaningful results as would leaving it unconnected, adding a...
View Article1920 Daylight Savings
I am trying to configure daylight savings on a 1920 switch, however it appears that I cannot specify a date of more than one year in the furture so that it gets applied each year....clock summer-time...
View ArticleRe: Routing between two different VLAN subnets (HP 1950 OfficeConnect)
Hi There,Thank you for the link and I have tried that earlier like many times. Maybe I'm trying to understand it incorrectly.What I have is two VLANS (40 & 45) with two different subnets/gateways....
View ArticleRe: Routing between two different VLAN subnets (HP 1950 OfficeConnect)
Is the gateway for each VLAN the VLAN interface on the switch? If so then you shouldnt need to add any routes.If the gateway is elsewhere (ie. a router/firewall), then that is the device that will do...
View ArticleRe: 1920 Daylight Savings
What software version is your HPE OfficeConnect 1920 actually running on? since R1112 (actually there is R1115) Time Zone and Daylight Saving Time can be set directly through Web UI...have you tried that?
View ArticleRe: 1920 Daylight Savings
Hi Parnassus,Thanks for the reply.I have just upgraded from 1112 to 1115 and hence tried to set the dayl;ght savings. I did it via the GUI originally and then looked at what CLI command it added and...
View ArticleRe: 1920 Daylight Savings
So you're saying that what you added via Web UI once seen on configuration seems to be not repeating as one would expect?
View ArticleRe: 1920 Daylight Savings
No, what I am sayiong is that when you do it via the web GUI it adds the command:clock summer-time summer-time repeating 02:00:00 2017 March last Sunday 01:00:00 2017 October last Sunday 01:00:00(i.e....
View Article