Re: 802.1X on HPE 1950
I upgraded the firmware to 3116, but I still get the same behavior. Â 802.1X does not authenticate and does not prompt for authentication. Â The logs on the RADIUS server do not show any entries for...
View ArticleCryptic error message HP V1810-48G
Every few months I receive error messages through syslog from one of our three switches (firmware PK 1.34) like this:[-2131330512]: hal_misc.c(96) 1523 %% Jump to NULL! Interrupt: 0x00000000Â vector:...
View ArticleRe: Cryptic error message HP V1810-48G
Just speculating (I'm not an embedded system developer): HAL_misc.c would refer to miscellaneous function(s) provided by Hardware Abstraction Layer (HAL contains all start-up code) by means of a C...
View ArticleTrunking GBIC ports in Procuve 1810G-24
I have several ProCurve 1810G-24 switches I want to link via fiber. with GBIC's inststalled each port (23 or 24) communicates with the other switch. As soon as I make either port part of a trunk is...
View ArticleRe: Trunking GBIC ports in Procuve 1810G-24
On J9450A SFP Slots 23S and 24S can't be used CONCURRENTLY with RJ45 Ports 23T and 24T: or the RJ45 ones or the SFP ones, not together (either/or)...so if you're using 23T then 23S can't be used too,...
View ArticleHP switches have a problem
Hi, i have a problem with HP 1910 - 48 PoE JG540A switch. The switch is located in our branch, the cameras are connected to this switch, all the cameras are working but the switch does not ping. I...
View ArticleHP 1920 - 8G-PoE Radius Authentication Web limitations
Hello,I have lots of 1920-8G-PoE  switch and I want to login these switches with my Windows 2016 NPS server. I can login many other switches which contain 2626, 2650, 2620, 2610, 5300 series, 5400...
View ArticleOC20 Management & Features
Hi,we recently received information about the new APs for small environments HPE OfficeConnect 20.The product sheets are looking promising for very small customers with up to 8 APs. But there are a few...
View ArticleRe: OC20 Management & Features
Linkk wrote: Are the APs able to use WPA2-Enterprise / 802.1X Authentication?Good question...latest QuickSpecs (04/09/2017) doesn't go further than saying WPA2 and Advanced Encryption. There is no...
View ArticleCannot log into new switch. Followed directions to a tee. Its not my first...
Just got a J9984a, 1820-48g. Â Brand new. Â Setup a laptop with IP 192.168.1.2, 255.255.255.0. Â Plugged directly into switch.It looks like it connects, but it wont hit the login switch with 192.168.1.1I...
View ArticleRe: Cannot log into new switch. Followed directions to a tee. Its not my...
I can ping it from a cmd window (192.168.1.1).Cannot telnet either... says "permission denied". Â Havent even been asked for a login.
View ArticleRe: Cannot log into new switch. Followed directions to a tee. Its not my...
Why do you think that Switch should have the Telnet server service enabled (if any at all)?From what HPE OfficeConnect 1820 Switch Series Installation and Getting Started Guide (March 2017), it should...
View ArticleHPE OC20 802.11ac (RW) Access Point performance issues
We deployed two customer sites with HPE OC20 devices. Both started to have performance issues with wireless with these new OC20 devices. Transfer speeds especially with SMB transfer from Windows...
View ArticleRe: HP switches have a problem
check switch default gateway address.switch default gateway address must have your branch site router lan address...
View ArticleRe: HPE OC20 802.11ac (RW) Access Point performance issues
Were Wireless hosts used to perform your transfer speed test [*] connected to the 2.4 GHz radio band IEEE 802.11n (Maximum theoretical throughput of 300 Mbps, more or less 30 MBps) or to the 5 GHz...
View ArticleRe: HPE OC20 802.11ac (RW) Access Point performance issues
Clients are connected at 5Ghz AC to OC20 if we check from client or from OC20. I have attached picture of that. I suggested to HPE ticket the 802.11g radio also, cause speed is so constant. Radio...
View ArticleRe: HPE OC20 802.11ac (RW) Access Point performance issues
Here is picture attached so you can see that even the OC20 management shows that clients are connected with 5Ghz bandwith.
View ArticleRe: HPE OC20 802.11ac (RW) Access Point performance issues
Would be interesting to perform the same test you already did on the exact same wireless host using a Linux live distribution as host OS instead of Microsoft Windows 10 (provided that any very recent...
View ArticleRe: HPE OC20 802.11ac (RW) Access Point performance issues
We have tried with different devices. OK, everyone has been with Windows 10. HP Zbook 14u G4, HP Elitebook 745 G4, Lenovo T470s, HP Zbook 17 G4 and HP Elitebook 840 G4 are the laptops that we have...
View ArticleRe: HPE OC20 802.11ac (RW) Access Point performance issues
Yeah, to test the Wireless device behaviour under Linux (once you checked the Windows device driver side) you don't need to install anything on your laptops...a Live Linux distribution - as example you...
View Article