Re: Where do I find FW upgrades for HP V1910 series switches?
Why does that site not know about the V1910 designation?Also, will this FW be compatible with the original JE009A, which was a 3com 2952 switch?
View ArticleRe: HP VLAN tagging on SFP
Note that SFP port:GigabitEthernet1/0/25 current state: UPPVID: 1Port link-type: trunk VLAN passing : 1(default vlan), 10, 20, 100 VLAN permitted: 1(default vlan), 10, 20, 100and copper port:...
View ArticleRe: HP VLAN tagging on SFP
Thanks for the response. I have in the meantime found out what has caused the issue. After some investigation it turns out someone enabled DHCP snooping but never trust the SFP port. So all is working...
View ArticleRe: HP VLAN tagging on SFP
wrote: Yes you are correct and Sorry for the confusion regarding the same PVID etc. I meant to make it clear that I disable the Ethernet port when I enable the SFP and vice versa.That was not an...
View ArticleHP 1910 tagging multiple vlans on trunk
Hi,I am trying to configure vlans across two switches, a 3com 4200g and hp 1910 48 port, I configured everything but the problem is with permitting multiple vlans on the 1910 trunk.On the interface of...
View ArticleRe: Where do I find FW upgrades for HP V1910 series switches?
Here is the latest firmware upgrade for hp Je009a I upgraded my switch yesterday to this...
View ArticleRe: HP 1910 tagging multiple vlans on trunk
Ok I solved it I have only to set tagging for the vlan on that port to be permitted
View ArticleAlcatel IP Phone interoperability with HP1810G-24G
Hello,I have connected an Alcatel IP Phone on my HP1810 switch.The phone deosn't receive any ip address from the DHCP server but if i connect the same phone on a hp2510switch, il is working fine.Could...
View ArticleOC20 AP WIFI
Bonjour ,Je voudrais de l’aide en français s’il vous plaît pour des bornes wifi HPE OfficeConnect OC20-RWSerial : Confidential Info ErasedSerial : Confidential Info ErasedJe suis en train d’installer...
View ArticleHPE 1910 tagging multiple vlans on trunk
Hi,I am trying to configure vlans across two switches, a 3com 4200g and HPE 1910 48 port, I configured everything but the problem is with permitting multiple vlans on the 1910 trunk.On the interface of...
View ArticleRe: HP 1910 tagging multiple vlans on trunk
Ok I solved it I have only to set tagging for the vlan on that port to be permitted
View ArticleHPE 1920-24G Switch : Hybrid port limité à 100MB ?
Bonjour,J'ai un switch HP 1920-24G dont le port N° 1 à un link type à "hybrid" ce qui me permet de connecter mon serveur de téléphonie IP à ce switch sur un VLAN dédié.Bien que la vitesse de ce port...
View ArticleRe: HPE 1920-24G Switch : Hybrid port limité à 100MB ?
wrote: Hence my question: Is a port whose link type is "hybrid" is limited in speed?No, it isn't.The Speed Port is generally limited by the port type: if you have a link between two 1Gbps ports - once...
View ArticleRe: HPE 1920-24G Switch : Hybrid port limité à 100MB ?
Thanks for your answer.We finnaly found what was the problem : the patch cable was damaged.We changed it and everything was ok.
View ArticleRe: HPE 1920-24G Switch : Hybrid port limité à 100MB ?
Great you solved. Use always certified - and in good health / fresh new - patch ethernet cables (Cat. 6 or better) if you can, that's to avoid such "Layer 1" issues.
View ArticleSwitches, VLANs and Configuration
Dear all,I would like your suggestions on a network setup as I am fairly new to networking, we are about to upgrade the setup and I am going to take a deep dive into networks.The new equipment includes...
View ArticleRe: Switches, VLANs and Configuration
HelloYou can choose how you configure the vlans on your uplink. If you prefer tagging all the vlans you can do that, just make sure you configure it the same way on both sides of the uplink.The reason...
View ArticleClik here to view.
How to assign port to access particular internet in multi internet switch?
Hi, i am new to switch configuration. I have two switches, A and B as show in attached picture, switch A connected with internet modem and provide internet connection to switch B. PC at switch B need...
View ArticleRe: Switches, VLANs and Configuration
I made a mistake, the access switches are HPE 1950 48p PoE+.The reason for an untgged vlan on an uplink is to have a default vlan on that port. If the uplink port receives untagged packets he will put...
View ArticleRe: Switches, VLANs and Configuration
If you connect a switch that does not support tagging to an uplink port without an untagged vlan(pvid) for example. You will not be able to communicate.But if you keep that in mind, and as you said you...
View Article