Re: How to assign port to access particular internet in multi internet switch?
helloI don't think it is possible what you want to do with that setup.You need different vlans and policybased routing to do what you are asking. So therefor you need an Layer 3 switch.I don't know if...
View ArticleRe: How to assign port to access particular internet in multi internet switch?
wrote:helloI don't think it is possible what you want to do with that setup.You need different vlans and policybased routing to do what you are asking. So therefor you need an Layer 3 switch.I don't...
View ArticleRe: How to assign port to access particular internet in multi internet switch?
You can try to configure vlan A for internet A en vlan B for internet B.Then you put Users A in vlan A and UsersB in vlan B, Then they will use the correct internet.But in this situation you will not...
View Articleerpprep.com
Start your Preparation for SAP C_AUDSEC_731 and become Authorization and Auditing certified with erpprep.com. Here you get online practice tests prepared and approved by SAP certified experts based on...
View ArticleRe: Switches, VLANs and Configuration
In case I connect an unmanaged switch that is unaware of vlans and does not support vlan tagging, like "D-Link DGS-1008P", will automatically connect to VLAN2 (if I set this vlan as untagged)or it...
View ArticleClik here to view.
Redundancy using fiber to connect "multi-site"
Hello everyone,I'm actually struggling with the configuration of a couple of switches we bought earlier this year.For now, this is a depictation of our network. You can see it's composed of different...
View ArticleRe: Switches, VLANs and Configuration
In case I connect an unmanaged switch that is unaware of vlans and does not support vlan tagging, like "D-Link DGS-1008P", will automatically connect to VLAN2 (if I set this vlan as untagged)or it...
View ArticleRe: Redundancy using fiber to connect "multi-site"
helloSpanning-tree is indeed what you need.Normally you should be able to enable STP on all those type of switches. You should think about which switch you want as root switch in the STP tree, first....
View ArticleRe: Switches, VLANs and Configuration
I have read that the traffic the exits an access port (with a vlan assigned on it) of a managed switches is stripped of vlan tags and becomes regular ethernet traffic. When regular ethernet traffic...
View ArticleRe: Switches, VLANs and Configuration
I have read that the traffic the exits an access port (with a vlan assigned on it) of a managed switches is stripped of vlan tags and becomes regular ethernet traffic. When regular ethernet traffic...
View ArticleClik here to view.
Re: How to assign port to access particular internet in multi internet switch?
wrote:You can try to configure vlan A for internet A en vlan B for internet B.Then you put Users A in vlan A and UsersB in vlan B, Then they will use the correct internet.But in this situation you...
View ArticleRe: How to assign port to access particular internet in multi internet switch?
Ok that changes the topology..That means you have a layer 3 device in your network. So before answering your question. How/where will Internet B be connected? also behind a firewall?If you can provide...
View ArticleRe: How to assign port to access particular internet in multi internet switch?
wrote:Ok that changes the topology..That means you have a layer 3 device in your network. So before answering your question. How/where will Internet B be connected? also behind a firewall?If you can...
View ArticleRe: How to Enable Telnet and SSH on HPE 1920s OfficeConnect
I was able to enable the Settings as instructed, but i couldn't get the startup config from the Switch: C:\pscp.exe -scp -l backup -pw backupuser -2 192.168.1.101:startup-config...
View ArticleRe: Switches, VLANs and Configuration
Between two managed switches, best practice is to tag all VLANs.If you have an unmanaged switch, then whichever is the untagged VLAN on the managed switchport you patch it to is the VLAN that...
View ArticleRe: Redundancy using fiber to connect "multi-site"
Loop protection isn't spanning tree. (You should enable Loop Protection on all Access ports and not on uplink ports, but that's a lower priority configuration item you should worry about later).All...
View ArticleRe: Switches, VLANs and Configuration
I think that I will leave vlan2 untagged so it can be set as primary/native vlan of the switches.Yes, correct, I will have the port that the unmanaged switch will be connected to to be untagged to the...
View ArticleHPE 1820-24G Link aggregation
Hello,can I use HPE 1820-24G for four-port Link aggregation?Thank you. John
View ArticleTHANG MANG CAP VO TU DIEN TU CUU HOA
Nhà sản xuất Thang Mang Cáp – Vỏ Tủ Điện – Tủ Cứu Hỏa theo kích thước và chủng loại yêu cầu của quý khách tại Hà Nội, với những sản phẩm đặc trưng của nghành hệ thống điện, chung tôi mang tới những...
View Article