Re: problem HP V1900 Switch!
I connected to switch using serial cable with VT100 emulation program, but when i press Control, Shift and - keys (like described here:...
View ArticleRe: problem HP V1900 Switch!
I solve this problem, i'll write it here, maybe it would be usefoull for someoneU must, not only press but also HOLD (Control, Shift and -) for some seconds
View ArticleRe: 1920 not passing traffic
if ports 1 & 2 are in the same VLAN, and the devices connected to these ports have IP addresses in the same subnet then it should just work, i.e. they should be able to see each other.Can you post...
View ArticlePlease suggest SNMP tutorials and free NMS SW
We need to get less amateurish managing our v1910 switches.Please suggest good tutorials that takes us from absolute beginners in snmp to a good insight into after-the-fact simple analysis of network...
View ArticleRe: Please suggest SNMP tutorials and free NMS SW
Assuming you have configured your switches to point to a syslog server and configured SNMP traps, then a simple free syslog server would be a good place to start as this would give you easy visability...
View ArticleAssigning Web Mgmt GUI access for single port on v1910-48G
I inherited a couple of v1910-48G switches at my company (coming up on 4 years now) and I have to restrict web gui mgmt for my PCI compliance (never came up before). In my cisco SG switches, I can...
View ArticleRe: Please suggest SNMP tutorials and free NMS SW
Can you suggest good tutorials that can teach us to understand basic snmp workings? We are absolute novices in snmp.
View ArticleRe: HP OfficeConnect 1920 (JG925A): force enable PoE regardless of what is...
I spoke with HPE support and was informed that the functionality I seek is not supported on HP devices. So there's that, I guess.
View ArticleV1910, setting up 2 vlans to talk each other and have their own internet router
Hello, I am new on the VLAN environment, I created 2 vlans, 10 and 20, each vlan has their own ip VLAN 10 192.168.3.5/24 on ports 1 - 32 and VLAN 20 192.168.12.10/24 ports from 33 - 48 all of them are...
View ArticleRe: V1910, setting up 2 vlans to talk each other and have their own internet...
You would need to span each VLAN to its router and move the hosts' default GWs to the routers, as the switch can only have one default route.Then each router needs a route for the other router's subnet...
View ArticleLink-aggregattion with media converter
Hi ,I have a problem. I need to create a link-aggegattion between the array and the branch of my company.I created the link-aggegattion with 2 ports. The interconnection between the array and the...
View ArticleRe: Link-aggregattion with media converter
hi,Post both bridgeaggregation configurations, the 4 interface configurations (and the switch they belong to), and the software versions of the swtiches.E.g.switch (with bagg 10): display...
View ArticleRe: Link-aggregattion with media converter
Post the output of the commands below: display link-aggregation summarydisplay link-aggregation verbose
View ArticleRe: Link-aggregattion with media converter
HiThanks for reply.Just one more thing. If I plug one of the cables into LAG, it works. But if I connect the 2 cables in the LAG, the second is with static light and the second member does not work....
View ArticleRe: Link-aggregattion with media converter
HiThanks for reply.Just one more thing. If I plug one of the cables into LAG, it works. But if I connect the 2 cables in the LAG, the second is with static light and the second member does not work....
View ArticleRe: Please suggest SNMP tutorials and free NMS SW
Hi,There are a number of basic introductary tutorials widely availbale on the internet, however I dont think that you really need to understand these in great depth to achieve your goal..If you are...
View ArticleSteps to renew SSL Certificate for HP SM, OMi, OMW, and NNMi in internal CA?
Hi Experts,Any one here has steps to renew SSL Certificate for HP SM, OMi, OMW, and NNMi using internal CA? I'm struggeling to find the ways to renew our SSL Certificate that about to expire next...
View ArticleRe: Please suggest SNMP tutorials and free NMS SW
I think I understand as far as this.The switches have various capabilities as far as what SNMP queries and what SNMP TRAPs and INFO requests they can handle.This is defined at manufacturing and/or FW...
View ArticleRe: Assigning Web Mgmt GUI access for single port on v1910-48G
Hi!You can access the page of switch (GUI), in the menu DEVICE > USERS.In this menu you can configure roles from users.In NETWORK > SERVICES > HTTP/HTTPS, you can configure a ACL for access...
View ArticleRe: Using a V1910 switch to perform scheduled pings?
Hi"I don't understand your question.Can you explain better what you need?
View Article